How to fix the Worcester Bosch C6 boiler error code

C6 Boiler Error Code

The C6 boiler error code on a Worcester Bosch combi boiler typically indicates a problem with the flow thermistor or the wiring connected to it. The flow thermistor is a sensor that measures the temperature of the water flowing through the boiler’s heat exchanger.

C6 Boiler Error Code

The C6 boiler error code on any Worcester Bosch combi boiler may be caused by a faulty thermistor, which may be reading the temperature incorrectly or not reading it at all. It can also be caused by damaged or faulty wiring that is preventing the thermistor from sending accurate temperature readings to the boiler’s control board.

In some cases, the C6 boiler fault code may also be caused by a blockage or restriction in the water flow, preventing the flow thermistor from accurately reading the temperature of the water. This can be caused by a buildup of limescale or debris in the boiler’s pipes or heat exchanger.

Check for a water flow issue

A common cause of the C6 boiler error code is a lack of water flow, which can be caused by a blocked or restricted pipe. Check that the water supply is on, and that all valves and pipes are open and clear of debris. If necessary, clean the pipes and valves to ensure that water can flow freely.

Check the wiring

The C6 boiler error code can also be caused by faulty wiring. Check that all wiring connections are secure and undamaged. If there are any issues with the wiring, you may need to replace it.

Check the flow thermistor

The flow thermistor is a sensor that measures the temperature of the water flowing through the boiler’s heat exchanger. If the thermistor is faulty, it may need to be replaced. A qualified heating engineer can test the thermistor to determine if it is the cause of the problem.

Reset the boiler

In some cases, resetting the boiler can clear the C6 combi boiler error code. To do this, turn off the power to the boiler, wait a few minutes, and then turn it back on. If the error code persists, you will need to perform additional troubleshooting steps.

Contact a qualified heating engineer

If you are unable to resolve the C6 error boiler code on your own, or if you are not comfortable working on your boiler, it is recommended to contact a qualified heating engineer. They will be able to diagnose the issue and recommend the appropriate repairs.
Scroll to Top